 |
ISSCT |
|
|
 |
|||
| |
ISSCT |
|
|
|
|
|||
ISSCT PAPERS
to be published in
(NOTE: The abstract of each of the papers cited)
2007
Published in the issue of July
2007
CO22 - Preliminary assessment of the Zeachen technology for ethanol production
from sugar process streams
Lavarack, Edye, Blinco, Hodgson, Bullock -
Australia
CO31 - Integrated biodiesel production in
sugar and alcohol mills
Oliverio, Barreira - Brazil
Other Papers chosen by the
Journal which will be published in the forthcoming issues.
CO2 - A sugar mill cogeneration plant repowering alternatives evaluation through
the combination of thermodynamics and economic concepts
Silva Lora, Zampieri, Venturini, Santos - Brazil
CO6
- Simulation and design of a bagasse gasifier
Hobson, Joyce - Australia
CO7 - An overview of bagasse gasification R&D activities at the centre for
Sugar Research and Innovation
Hobson, Joyce - Australia
CO11 - Fodder yeast production: A new approach for distillery slops treatment
Otero, Saura, Martinez, Almazan - Cuba
CO14 - Deterioration of molasses during storage: possible cause and means to
prevent it
Kulkarni - India
CO18 -
By-products from bagasse
Day, Dequeiroz, Chung, Kim - USA
CO19 - New sugar cane varieties and year round sugar and ethanol production with
bagasse based cogeneration in Barbados
Rao, Davis, Simpson, Zetina - West Indies
CO25 - Carbonisation and gasification of bagasse for effective
utilisation of sugarcane biomass
Ueno, Kawamitsu, Komiya, Sun, Shinogi - Japan
CO30 - Mote carlo simulation as a tool for technical modelling and project
analysis
Joyce, Hobson - Australia
FE8
- The conversion of a BMA diffuser to a Boasch Projects Chainless Diffuser - the
first season's experience
Schroeder, Voigt, Moor - South Africa
FE11 - Integrated beet and cane sugar processing with high co-generation
efficiency
Avram-Waganoff, Morgenroth - Germany
FE14
- Unique two roller mill combination - the CMR mill
Nikam, Kulkarni - India
FE17 - Hard faced welded tips in shredder hammers - technical and economical
performance
Gomez, Canon, Ramirez - Colombia
FE20 - An economical means of improving the juice extraction performance of
four-roll mills
Kent, Zapatero - Australia
FE26 - Fast track implementation
of one of the world's largest and most complex sugar factory projects
Jansen, Wade - USA
FP7 - Microwave measuring for the Brix control - micro-polar Brix
Klute, Springer - South Africa
FP8
- The experience and utilisation of on-line sugar colour in a raw sugar mill
King - Australia
FP12 - Options for retrofitting white sugar millg (WSM) technology into existing
raw sugar factories
Jensen, Kitching - South Africa
FP13 - An assessment of post-harvest sucrose losses in sugarcane billets under
sub-tropical conditions
Solomon, Shrivastava, Singh, Singh, Sawnani, Prajapati
- India
FP19 - Investigation into the use of the fractal concept for improving juice
clarifier performance
Loubser, Davis - South Africa
FP24 - A new desing of jigger system to improve vacuum pan
Rackemann, Broadfoot - Australia
FP26
- Innovative production of plantation white sugar from raw sugar during sugar
cane chortage using existing boiler and process house machineries
Ravichandran, Dharmalingam, Ramamoorthy, Venkatesh,
Sajith, Ravindran - India
FP39 - The effect of trash on the operation and performance of a raw sugar
factory
Kent, Zapatero - Australia
FP40 - Optimising the performance of rotary sugar dryers through
modelling and control
Steindl - Australia
MA3 - Cane quality payment incentives to optimise the production of sugar,
ethanol and cogeneration
Wynne - South Africa
MA15
- Response to sugarcane smut in eastern Australia
Milford, Allsopp, Adriaansen - Australia
MA19 - Case study: Introduction of information systems to improve factory
processes
King, von Pannier - South Africa
MA20 - Evaluating regional net benefits of whole crop harvesting to maximise
co-generation
Thorburn et al. - Australia
